Adhere to the instructions on this page to flash stock rom of android devices using LiveSuit application,
Note the android device you are to flash have to be 40 to 50 percent charged
proceed with the instructions below:
flash Stock rom using LiveSuit application
- Download and install ADB driver on your pc, if you have this installed already then skip this process
2. download livesuit app from any of the links below
livesuit version 1.11
livesuit version 1.9
livesuit version 1.7
extract the downloaded zip file and launch the app
3. select livesuit.exe
4. once livesuit is launched select yes to allow the upgrade
5. Select Mandatory on the upgrade mode
6. Now you should disconnect all other phones connected to the pc, then click next to continue
7. Now you will need to select the .img file on the firmware you downloaded, click yes to select the firmware
8. DONT CLICK ON FINISH BUTTON
9. Now its time to connect your smartphone to the computer, power the phone off and connect through USB cable
firstly connect the USB cable to the computer then press volume down key of your smartphone and connect the USB cable to it,while holding the volume key you should also press the power button 10 times or more to enable the computer to recognise it
10. Once your device is recognized, you will be able to see the windows below
11. Click yes to continue
12. Livesuit will start the flashing process which will take around 4 – 5 minutes
13. once the flashing is completed you will see the upgrade successful window click ok
14. click on the exit button to close the livesuit app
15. You can now disconnect your device and power it up
Congrats, Your device has been flashed successfully using livesuit application
NOTE: The above flashing process is possible only on devices that support livesuit app
BACKUP: do well to take a backup if you don’t want want to lose your personal data and files
best regards